This paper craft model is for an SD Barbatos Gundampapercraft template. This SD Gundam version is based on the ASW-G-08 Gundam Barbatos full form. This gundam is commonly called the Barbatos gundam.
The ASW-G-08 Gundam Barbatos is a Mobile Suit that appears in the Mobile Suit Gundam : Iron-Blooded Orphans. It is piloted by Mikazuki Augus.
To give due credit, this papercraft model template is designed by Apaper. And this SD ASW-G-08 Gundam Barbatos papercraft model template is available in PDF and PDO versions with a few download links to choose from below.
The ASW-G-08 Gundam Barbatos is a Mobile Suit that appears in the Mobile Suit Gundam : Iron-Blooded Orphans. It is piloted by Mikazuki Augus.
To give due credit, this papercraft model template is designed by Apaper. And this SD ASW-G-08 Gundam Barbatos papercraft model template is available in PDF and PDO versions with a few download links to choose from below.
 |
| SD ASW-G-08 Barbatos Gundam Papercraft Model Template (Mobile Suit Gundam : Iron Blooded Orphans) |
The Gundam Barbatos is the 8th of the 72 Gundam Frames created by Gjallarhorn near the end of the Calamity War to counter the threat of the powerful mobile armors such as Hashmal. It was later discovered by Maruba Arkay in the Mars desert and was recovered to serve as a power reactor for Chryse Guard Security's base. The machine was taken out of the base by Mikazuki Augus during Gjallarhorn's assault. CGS, now Tekkadan, continued to improve the suit with parts and armor taken from defeated Gjallarhorn mobile suits. Teiwaz technicians later restored the Barbatos to its original appearance and close to its original performance.
Download SD ASW-G-08 Gundam Barbatos (Mobile Suit Gundam : Iron Blooded Orphans) Papercraft Model Template
 |
| Download Link 1 : PDF paper craft template |
 |
| Download Link 2 : PDO paper craft template |
Enjoy!
💁
Some info about the ASW-G-08 Gundam Barbatos :
The Gundam Barbatos is one of 72 "Gundam" frames that was produced and used in the Calamity War, roughly 300 years ago. After it was recovered, Chryse Guard Security used it as a power reactor; aside from the fact that its Ahab Reactors were still functional, this was done mainly because Barbatos' cockpit was missing when it was found. A new cockpit similar to the one used by the CGS mobile workers was installed prior to its redeployment by the 3rd Group. Poor maintenance over the centuries since the Calamity War has degraded the Barbatos' armor and full combat potential. This is later rectified by Teiwaz technicians, who not only restored the Barbatos to its original look but also returned it back to a performance close to its original.
Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of Inertial Control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.
FORMS of the Gundam Barbatos
1st Form
Barbatos was in this form when Maruba Arkay (CGS president) discovered it in Mars' desert 300 years after the Calamity War. Since its Ahab Reactors were still in an operational state it was used as the CGS HQ's power source until Mikazuki boarded it. At the time it did not have any shoulder armor.
2nd Form
CGS was later reformed into Tekkadan, and prior to Tekkadan's departure to Earth, the Barbatos' 1st Form is fitted with the shoulder armor from the captured EB-06 Graze. These shoulder armors have the same white and blue color scheme as the main body as they are painted with the same Nanolaminate Armor.
3rd Form
After the battle with Gjallarhorn near the low orbital station, the Barbatos 2nd Form is equipped with the Wire Claw captured from Gaelio's Schwalbe Graze to fix the damaged left forearm armor.
4th Form
Barbatos' original form, it is reproduced by technicians at Teiwaz's base, Saisei, based on ancient materials from the time of the Calamity War that had been recorded in their database. The machine's weight balance is stabilized, and the two reactors' output and operation rate are also improved after extensive maintenance and overhaul. While Barbatos's performance is now closer to the original state, it is still not yet at 100%.
5th Form
A new form with added waist boosters, redesigned forearm armor with mortars and chest-mounted reactive armor. Some of the new parts were provided by the Montag Company. The waist boosters serve to increase the suit's mobility and were originally the hip-mounted flight units of Ein's Schwalbe Graze, Tekkadan recovered the parts when they were dislodged from the Schwalbe Graze during an earlier battle. The reactive armor serves as a countermeasure against the Kimaris' hit-and-run attacks with its Gungnir lance.
5th Form Ground Type
A modified version of the 5th Form for ground combat, it was created with the help of Eco Turbine and again used parts provided by the Montag Company. The leg suspension was adjusted to adapt to the earth's gravity and new feet were used. As a result of this, the suit now has a higher center of gravity, leading to faster reaction and thus better mobility under gravity. The added waist thrusters were removed as they were deemed useless for ground combat, and the forearm mortars can be exchanged with autocannons.
6th Form
A reinforced version of the 5th Form Ground-Type for the final battle. The side skirt armor was replaced with a pair "Tail Boosters", the shoulder armor was replaced with those from the EB-06r Graze Ritter, and additional armor is added to the chest. The tail boosters improve the suit's ground mobility, and have reduced fuel consumption. The added chest armor provides the cockpit with better protection from concentrated attacks and can withstand prolonged battle. Although the new armor reduces the suit's mobility, they allow the Barbatos to battle for prolonged periods without any resupply. When required, the shoulder armors can be ejected and used as a decoy.
Gundam units like the Barbatos are able to achieve a high energy output because they possess two Ahab Reactors. However because it is difficult to run them in parallel operation, only a total of 72 Gundam frames were ever produced. The burden experienced by the pilot is high as a result of the high output and maneuverability; however it's mitigated by the implementation of Inertial Control due to the use of Ahab Particles generated from the reactor when a phase transition occurs inside its vacuum device. The cockpit structure is positioned in front of the reactor to take advantage of this. Among the same frame machines, Barbatos has been adjusted for an emphasis on versatility, it has the potential to adapt to every circumstances by exchanging its equipment. It can also use weapons and armor from defeated enemies to improve its fighting capabilities.
FORMS of the Gundam Barbatos
1st Form
Barbatos was in this form when Maruba Arkay (CGS president) discovered it in Mars' desert 300 years after the Calamity War. Since its Ahab Reactors were still in an operational state it was used as the CGS HQ's power source until Mikazuki boarded it. At the time it did not have any shoulder armor.
2nd Form
CGS was later reformed into Tekkadan, and prior to Tekkadan's departure to Earth, the Barbatos' 1st Form is fitted with the shoulder armor from the captured EB-06 Graze. These shoulder armors have the same white and blue color scheme as the main body as they are painted with the same Nanolaminate Armor.
3rd Form
After the battle with Gjallarhorn near the low orbital station, the Barbatos 2nd Form is equipped with the Wire Claw captured from Gaelio's Schwalbe Graze to fix the damaged left forearm armor.
4th Form
Barbatos' original form, it is reproduced by technicians at Teiwaz's base, Saisei, based on ancient materials from the time of the Calamity War that had been recorded in their database. The machine's weight balance is stabilized, and the two reactors' output and operation rate are also improved after extensive maintenance and overhaul. While Barbatos's performance is now closer to the original state, it is still not yet at 100%.
5th Form
A new form with added waist boosters, redesigned forearm armor with mortars and chest-mounted reactive armor. Some of the new parts were provided by the Montag Company. The waist boosters serve to increase the suit's mobility and were originally the hip-mounted flight units of Ein's Schwalbe Graze, Tekkadan recovered the parts when they were dislodged from the Schwalbe Graze during an earlier battle. The reactive armor serves as a countermeasure against the Kimaris' hit-and-run attacks with its Gungnir lance.
5th Form Ground Type
A modified version of the 5th Form for ground combat, it was created with the help of Eco Turbine and again used parts provided by the Montag Company. The leg suspension was adjusted to adapt to the earth's gravity and new feet were used. As a result of this, the suit now has a higher center of gravity, leading to faster reaction and thus better mobility under gravity. The added waist thrusters were removed as they were deemed useless for ground combat, and the forearm mortars can be exchanged with autocannons.
6th Form
A reinforced version of the 5th Form Ground-Type for the final battle. The side skirt armor was replaced with a pair "Tail Boosters", the shoulder armor was replaced with those from the EB-06r Graze Ritter, and additional armor is added to the chest. The tail boosters improve the suit's ground mobility, and have reduced fuel consumption. The added chest armor provides the cockpit with better protection from concentrated attacks and can withstand prolonged battle. Although the new armor reduces the suit's mobility, they allow the Barbatos to battle for prolonged periods without any resupply. When required, the shoulder armors can be ejected and used as a decoy.
Info source : http://gundam.wikia.com/wiki/GAT-X105E-Strike-Noir-Gundam
You may see the list of papercraft templates that we have here in this blog by clicking here : ► PAPERCRAFT LIST. If there are any paper craft model templates that you want but cannot find here, just comment your request below or go to our Request Page.
Thank you.
income searches:
EmoticonEmoticon